Skip to main content
Edit Page Style Guide Control Panel
Yanmar SM2 VS YM2 Article Image Set-01
Textured strip overlay.
Graphic dots

Yanmar SM240 vs. YM238: 100% Yanmar vs. Co-Built Tractor Comparison

When it comes to the Yanmar SM240 vs. Yanmar YM238, the real question is whether you want a tractor built 100% by Yanmar or a co-built tractor with slightly more muscle. Yanmar now sells two gear-drive tractors in the same 37 to 38 horsepower range. The YM238 is built entirely by Yanmar, from the engine to the final drive. The SM240 is co-built, with a Yanmar diesel engine and Yanmar loader, but it's produced by a partner manufacturer.

One out-lifts the other on the loader by a wide margin, and the other feels like a higher-quality machine. The SM240's loader lifts 2,116 lbs. to full height, while the turbocharged YM238 makes 38.2 gross hp and puts 31.9 hp to the PTO. So which one should you actually buy? Below, we compare the SM240 and YM238 on specs, real-world performance, and price, so you can decide for yourself which is best.

Yanmar SM240 vs. YM238: Quick Comparison

SpecificationYanmar SM240Yanmar YM238
Built byTYM (co-built, Yanmar engine)Yanmar (engine to final drive)
Engine3-cyl. Yanmar TNV diesel, naturally aspiratedYanmar diesel, turbocharged
Gross hp36.9 hp @ 3,000 RPM38.2 hp @ 2,600 RPM
PTO hp28.2 hp31.9 hp
TransmissionSynchro shuttle8F/8R Synchronized Reverser Transmission (SRT)
PTO typeIndependent, electro-hydraulic switchTransmission-driven, mechanical lever
3-point lift (link ends)2,639 lbs.2,205 lbs.
3-point lift (24 in. behind)1,558 lbs.1,609 lbs.
LoaderRL505YL405
Loader lift (full height)2,116 lbs.1,500 lbs.
Max lift height101.5 in.88.3 in.
Breakout force3,435 lbs.2,500 lbs.
Weight / ground clearance3,020 lbs. / 12.8 in.2,866 lbs. / 10.6 in.
Fuel capacity / warranty9 gal. / 10-yr., 3,000-hr. powertrain10.5 gal. / 10-yr., 3,000-hr. powertrain

The SM240 wins on loader lift, 3-point lift at the link ends, PTO features, and ground clearance, while the YM238 wins on PTO horsepower, fuel capacity, and build quality.

Don't want to read? WATCH THE FULL VIDEO HERE:

[VIDEO EMBED]

Yanmar SM Series Background: Who Builds the SM240?

The SM240 has a story that's different from any other Yanmar we've covered. In January 2023, Yanmar America signed a supply agreement with TYM, a Korean tractor manufacturer, to provide three Yanmar-branded tractor models for the North American market. TYM had already been putting Yanmar's TNV diesel engines in its own sub-compact and compact tractors for years.

Under this agreement, TYM builds the tractor, Yanmar supplies the engine, and the finished product has to meet Yanmar America's Quality Management System before it ever reaches a dealer. As Yanmar put it at the time, these tractors would be "designed and built with Yanmar diesel engines."

The Yanmar SM Series Lineup

The SM240 made its public debut at Equip Expo in Louisville, Kentucky, in October 2023, and in August 2024 Yanmar officially launched the full SM Series. The lineup includes three tractors:

  • SM240: the gear-drive model we're comparing here
  • SM240H: the same engine, loader, and frame, but with a clutchless hydrostatic transmission and optional cruise control
  • SM475: a much larger 74 hp tractor with a power shuttle transmission and a fully enclosed cab, making it the highest-horsepower tractor Yanmar currently sells in the U.S.

Yanmar markets the SM240 for properties between 15 and 45 acres, and its biggest selling point is lift capacity. Yanmar says it has one of the highest lift capacities of any compact tractor on the market.

As for the YM238, we recently published a full in-depth review of the YM2-Series, including the history behind that lineup. Read our full Yanmar YM2-Series review to learn more.

So the SM240 is a co-built tractor: Yanmar's engine, TYM's tractor, and Yanmar's warranty.

Yanmar SM2 VS YM2 Article Image Set-02

Yanmar SM240 vs. YM238: Engine, Transmission & PTO Horsepower

On paper these two engines look almost identical, but they make their power in two very different ways.

Turbocharged vs. Naturally Aspirated

The SM240 is powered by a 3-cylinder, naturally aspirated Yanmar TNV diesel engine rated at 36.9 gross hp at 3,000 RPM. The YM238 makes 38.2 gross hp at a lower 2,600 RPM, and it's the only one of the two with a turbocharger.

The turbo gives you more torque, less engine noise, and better performance at high altitudes. It's a big reason the YM238 puts out 31.9 hp at the power take-off (PTO), compared to 28.2 hp on the SM240. That's nearly 4 more horsepower going to your rotary cutter, tiller, or post hole digger.

All-Yanmar Powertrain vs. Co-Built Drivetrain

The YM238 also benefits from a fully Yanmar powertrain. The engine, transmission, front axle, and final drive are all engineered and manufactured by Yanmar and matched together using what Yanmar calls PerformanceLink Technology. The idea is to minimize power loss between those components, which gives you more usable power and better fuel efficiency. On the SM240, you're still getting a proven Yanmar engine, but the rest of the drivetrain is built by TYM.

Transmission: Synchro Shuttle vs. SRT

Both tractors use a dry single-plate clutch. The SM240 uses a synchro shuttle transmission, and the YM238 uses an 8-forward, 8-reverse Synchronized Reverser Transmission (SRT) with a top speed of 12.6 mph. In both cases, you can change between forward and reverse without grinding gears or coming to a full stop, which makes loader work much faster.

Fuel, 4WD & Warranty

The YM238 holds 10.5 gallons of fuel, compared to 9 gallons on the SM240. Both tractors come with selectable 4WD and a foot-pedal-operated rear differential lock, and both are covered by Yanmar's 10-year, 3,000-hour limited powertrain warranty.

At Tractor Bob's, we like to take things a step further, which is why we're home of the Lifetime Powertrain Warranty. When you buy a tractor from us, we can extend the powertrain warranty on the machine for life. Contact Tractor Bob's and ask about our Lifetime Powertrain Warranty Program.

So when it comes to the powertrain, the horsepower might be close, but the turbocharged, all-Yanmar YM238 gives you more power where it counts: at the PTO and the rear wheels.

Yanmar SM2 VS YM2 Article Image Set-07

SM240 vs. YM238 3-Point Hitch & PTO

One area where the co-built SM240 might outshine the YM238 is the 3-point hitch, specifically the features you get.

3-Point Lift Capacity

Both tractors use a Category 1 3-point hitch, but they lift differently. The SM240 lifts 2,639 lbs. at the lower link ends, compared to 2,205 lbs. on the YM238. But when you measure 24 inches behind the link ends, the YM238 actually lifts slightly more, at 1,609 lbs. compared to 1,558 lbs. on the SM240. So the SM240 has more lift up close, while the YM238 holds onto its lift capacity a little better when the load is farther out.

Telescoping Lower Links & Sway Bars

Where the SM240 really pulls ahead is the hardware. It comes with telescoping lower links, which slide out so you can hook up implements without having to back the tractor in perfectly. It also has quick-pin adjustable sway bars, so you can lock out or loosen the side-to-side sway of your implement in seconds.

The YM238 has fixed lower links and standard threaded turnbuckle-style sway bars, which work just fine but take more time, and sometimes a wrench, to adjust. Both tractors have a hydraulic fluid sight glass at the rear, so you can check your hydraulic fluid level at a glance. It's a really nice feature you won't find on every tractor.

Independent PTO vs. Transmission PTO

The PTO is another big difference. The SM240 has an independent PTO engaged with an electro-hydraulic switch. That means your PTO runs independently from your transmission clutch, so you can stop the tractor while your mower or snow blower keeps running.

The YM238 uses a transmission-driven PTO with an overrunning clutch, engaged with a mechanical lever, which means pushing in the clutch pedal stops your PTO too. Both run at 540 RPM, and on the YM238 you'll reach 540 at 2,360 engine RPM.

Rear Remotes

Neither tractor comes with rear remotes from the factory. The SM240 can be ordered with one or two remote valves, while the YM238 offers an optional single-spool rear remote. Of course, we can add those for you at Tractor Bob's. We can also swap the YM238's fixed lower links for telescoping ones if you decide to go with the YM2-Series.

So while the YM238 has more PTO horsepower, the SM240 makes better use of it with an independent PTO, telescoping lower links, and quick-pin sway bars.

Yanmar SM2 VS YM2 Article Image Set-09

SM240 vs. YM238 Loader: Lift Capacity, Height & Breakout Force

If lifting capacity is the only thing you care about, the SM240 wins this round easily. But that extra lifting power comes with an important caveat.

Loader Lift Capacity

The SM240 uses Yanmar's RL505 loader, which lifts 2,116 lbs. to full height at the pivot pins, with a max lift height of 101.5 inches and a breakout force of 3,435 lbs. The YM238 uses the YL405 loader, which lifts 1,500 lbs. to full height, with a max lift height of just 88.3 inches and a breakout force of 2,500 lbs.

That's over 600 lbs. more lifting capacity, more than a foot of extra lift height, and nearly 1,000 lbs. more breakout force on the SM240. It also comes with a larger 73-inch bucket, compared to the 61-inch bucket on the YM238.

Both loaders are quick-release, so you can remove the entire loader in just a few minutes and shorten your tractor's overall length. Both also use a universal skid steer-style quick attach, so swapping loader attachments is easy on either tractor.

Is the SM240 Loader Safe?

Now here's the catch. The SM240's loader can lift more weight than a tractor of this frame size can comfortably keep stable. When you pick up a heavy load and raise it high, your center of gravity moves up and forward, and the tractor becomes much easier to tip, especially on a slope or when you're turning.

On top of that, the SM240's loader hydraulics are extremely responsive. That's great for quick, light work, but it also makes it easier to accidentally drop a heavy load too fast. So on the SM240, proper rear ballast, like a box blade or ballast box on the 3-point, isn't just recommended. It's a must.

When we tested this tractor, it was immediately noticeable that the loader's power is almost too much for the frame, and for novice users it can even feel unsafe. The YL405 loader on the YM238 lifts less, but it feels much more stable, predictable, and controlled.

Not sure which is right for you? Stop by Tractor Bob's in Gainesville, Texas, during one of our Demo Days, where you can test the lifting capacities for yourself.

So the SM240 is the right pick if you want the most lifting power you can get in this size tractor; just know it can be more dangerous to operate if you're not careful.

YM-2 ARTICLE PHOTOS-04

Matching Implements to the SM240 and YM238

Both tractors use a Category 1 3-point hitch and a 540 RPM PTO, so most Category 1 3-point implements are on the table. The bigger question is how much PTO power each implement needs.

Before you buy a rotary cutter, tiller, or other PTO-powered implement, compare its recommended PTO horsepower to the 28.2 PTO hp on the SM240 or the 31.9 PTO hp on the YM238. If the implement uses hydraulics, like a top-and-tilt kit or a hydraulic angle blade, plan on adding a rear remote. And if you'll be doing heavy loader work on the SM240, budget for a ballast box or a heavy 3-point implement from day one.

So if you'll mostly run PTO-hungry implements, the YM238 gives you more headroom, while the SM240's independent PTO and telescoping links make mowing and hookups easier.

Build Quality: 100% Yanmar vs. Co-Built

Build quality is where the difference between 100% Yanmar and co-built really shows up.

Steel vs. Plastic Body Panels

The YM238 has a steel hood and steel fenders, which feel more solid and hold up better to cracking and sun fading over time. The SM240 has a plastic hood, and its rear fenders are plastic on the outer edge, with only the inner portion made of metal. Plastic doesn't rust, but it's not going to feel as solid as steel.

Floorboard & Floor Mats

You can see the same difference on the floorboard. Both tractors come with rubber floor mats, but on the YM238 the mats are thicker and securely fastened to an isolation-mounted, flat floorboard. On the SM240, the mats are thinner and simply rest on top of the floorboard, so they tend to slide around while you're working. It might seem like a small detail, but it says a lot about the overall attention to quality on each machine.

Gear Shifter: H-Pattern vs. Inline

The gear shifter is another big one. The SM240 uses a traditional H-pattern gear shifter, meaning it moves through four quadrants. The YM238 uses an inline shifter that only moves forward and backward, which makes it much snappier and more intuitive to use, especially when you're shifting often.

Comfort & Operator Features

Overall, the YM238 is simply the more enjoyable tractor to operate. The controls, steering wheel, and overall layout are more user-friendly, and the whole machine feels more refined.

That's not to say the SM240 doesn't have good features. It comes with dual brake pedals for tighter turns, an operator step to help you climb on and off, a foldable rollover protective structure (ROPS), and a factory backhoe option with a 16-inch bucket. But when you sit on both tractors back-to-back, the YM238 feels like a higher-quality machine, while the SM240 feels a bit more economy-leaning.

So when it comes to build quality, the 100% Yanmar YM238 is the clear winner, with its steel hood and fenders, better floor mats, nicer steering wheel, and more ergonomic, responsive controls.

Yanmar SM2 VS YM2 Article Image Set-08

SM240 vs. YM238 Dimensions & Weight

When it comes to size, the SM240 is the bigger tractor in nearly every direction.

The SM240 weighs 3,020 lbs., with 12.8 inches of ground clearance and a wheelbase of around 66 inches. The YM238 weighs 2,866 lbs., with 10.6 inches of ground clearance and a wheelbase of around 66 inches. With the loader installed, the YM238 is around 146 inches long and 53.5 inches wide, while the SM240 is around 159 inches long and 66 inches wide.

So the SM240 is the heavier tractor with more ground clearance, and it's a bit longer and wider as well, while the YM238 is slightly more compact.

Screenshot 2026-06-25 at 2.06.30 PM

Yanmar SM240 vs. YM238 Price

How much does a Yanmar SM240 or YM238 cost? The Yanmar SM240 has an MSRP of $35,299, and right now Tractor Bob's special pricing is just $28,900. The Yanmar YM238 has an MSRP of $36,299, with Tractor Bob's special pricing at $29,900.

That's a savings of over $6,000 on either tractor when you shop through us. We deliver across the country, and these deals are only available for a limited time. Request a quote, let us know you read this article, and ask about our Lifetime Powertrain Warranty offer.

Pricing current as of November 2026 and subject to change. Specials are available for a limited time.

So for almost the same money, the decision comes down to which strengths matter more to you, not the price tag.

Yanmar SM2 VS YM2 Article Image Set-03

Yanmar SM240 or YM238: Which Should You Buy?

So which is best, 100% Yanmar or co-built?

Choose the SM240 if… you want the most lifting power in a gear-drive tractor under 40 hp, along with an independent PTO and a better 3-point setup. The SM240 is going to be hard to beat. Just respect that loader and make sure the tractor is properly ballasted.

Choose the YM238 if… you want a tractor that feels better built, is more enjoyable to drive, and puts more horsepower to the PTO.

So overall, the YM238 is the better tractor, and it's the one we'd recommend to most homeowners and acreage owners.

YM-2 ARTICLE PHOTOS-08

Yanmar SM240 vs. YM238 FAQs

Who makes the Yanmar SM240?

The SM240 is built by TYM, a Korean tractor manufacturer, under a 2023 supply agreement with Yanmar America. It uses a Yanmar TNV diesel engine, must meet Yanmar America's Quality Management System, and is covered by Yanmar's warranty.

Is the Yanmar YM238 built entirely by Yanmar?

Yes. The YM238's engine, transmission, front axle, and final drive are all engineered and manufactured by Yanmar and matched together with Yanmar's PerformanceLink Technology.

How much horsepower do the SM240 and YM238 have?

The SM240 makes 36.9 gross hp at 3,000 RPM and 28.2 PTO hp. The turbocharged YM238 makes 38.2 gross hp at 2,600 RPM and 31.9 PTO hp.

Which tractor has more loader lift capacity?

The SM240's RL505 loader lifts 2,116 lbs. to full height with a 101.5-inch max lift height and 3,435 lbs. of breakout force. The YM238's YL405 loader lifts 1,500 lbs. to full height with an 88.3-inch max lift height and 2,500 lbs. of breakout force.

Is the SM240 loader safe to use?

Yes, with proper ballast and care. The SM240's loader can lift more than its frame size can comfortably keep stable, so a box blade or ballast box on the 3-point is a must, especially on slopes or when turning.

Does the SM240 have an independent PTO?

Yes. The SM240 has an independent PTO engaged with an electro-hydraulic switch. The YM238 uses a transmission-driven PTO with an overrunning clutch, engaged with a mechanical lever.

What transmissions do the SM240 and YM238 use?

The SM240 uses a synchro shuttle transmission, and the YM238 uses an 8-forward, 8-reverse Synchronized Reverser Transmission (SRT). Both use a dry single-plate clutch and let you change direction without grinding gears or coming to a full stop.

How much do the SM240 and YM238 weigh?

The SM240 weighs 3,020 lbs. with 12.8 inches of ground clearance. The YM238 weighs 2,866 lbs. with 10.6 inches of ground clearance.

What warranty comes with the SM240 and YM238?

Both tractors are covered by Yanmar's 10-year, 3,000-hour limited powertrain warranty. When you buy from Tractor Bob's, ask about our Lifetime Powertrain Warranty Program.

How much do the Yanmar SM240 and YM238 cost?

As of November 2026, the SM240 has an MSRP of $35,299 and Tractor Bob's special pricing of $28,900. The YM238 has an MSRP of $36,299 and Tractor Bob's special pricing of $29,900. Pricing is subject to change.

Get a Quote on the Yanmar SM240 or YM238

Ready to choose? Tractor Bob's can help you configure the right SM240 or YM238, add rear remotes and implements, explore financing, extend your coverage with our Lifetime Powertrain Warranty, and arrange nationwide delivery. Call 405.604.5454 (Oklahoma City, OK) or 940.336.4100 (Gainesville, TX), or request your quote online today.

Graphic dots

Related Posts

Explore